Tensometric sensor EMS310 is used for static measurement of torque moment. It is suitable for measurement of characteristics for drive transmissions, maximum torque control or torque control with combination with suitable electronic unit. The sensor is designed to minimize error components of force as axial force or moment in the radial direction.
Weight | 1,1 kg |
---|---|
Dimensions | 40 × ,110 cm |
Load direction | Non-rotating torque measure |
Rated Capacity (Fn) | 700Nm |
Range (F.S.) | 700 Nm |
Overload - Safe - Overload | 130% F.S. 150% F.S. |
Nominal sensitivity | 1.5 mV/V ± 2% |
Zero balance | 1% F.S. |
Non-linearity Hysteresis | 0.25% F.S. 0.5% F.S. |
Temperature effect - On zero - On output | 0.01% F.S./10 °C 0.01% F.S./10 °C |
Bridge resistance - Input - Output | 1100 Ω ± 50 Ω 1050 Ω ± 20 Ω |
Insulation impedance | > 5000 MΩ |
Excitation - Recommended - Maximal | 10 V 15 V |
Temperature range - Compensated - Operating | 0 .. +50 °C -10 .. +80 °C |
Protection | IP54 |
Construstion | Stainless steel |
Cable - Type / Length | LifYDY 4x0.05 / 2 m |